Dmeissen JingHu (DMS-P6) is an inorganic coating manufactured from 5A-grade oyster and pearl shell raw materials using polymer nano-blending technology. Formulated with high hiding power and strong penetration, it's purpose-built for repainting and renovating old walls, refreshing worn surfaces without the need for extensive substrate work. No formaldehyde or TVOCs have been detected in the finished product, and application is odour-free.
Colour use: JingHu is the Interior Flat Paint Series option for bedrooms and renovation of existing walls. Its palette is shared with LuoJing.
| Application Method | Roller or Spray |
| Number of Coats | 2 coats |
| Re-coat Time | Approx. 1 hour |
| Mixing Ratio | 1 kg powder to 1.6 – 1.8 L clean water |
| Surface Drying Time | Approx. 2 hours |
| Application Temperature | 5°C – 35°C |
| Relative Humidity | 30% – 85% |
| Equipment Cleaning | Clean with water immediately after use |
| Product Code | DMS-P6 |
| Product Type | Inorganic dry powder architectural coating |
| Form | Dry powder |
| Packaging | 3 kg or 10 kg plastic bucket |
| Film Thickness | 50–60 μm dry / 100–120 μm wet |
| Theoretical Spreading Rate | 8–9 m²/kg |
| Contrast Ratio (White) | 0.96 |
| Scrub Resistance | 8,000 cycles |
| Stain Resistance | ≤3% |
| Fire Classification | A1 |
| Formaldehyde Content | Not detected |
| VOC Content | Not detected |
| Benzene Series Hazardous Substances | Not detected |
| Shelf Life | 18 months |
| Storage | Store in a cool, well-ventilated place |
| Applicable Standards | JG/T 445-2014; GB 30981.1-2025 |
Apply two coats of wall putty to the substrate, sand the surface smooth, and wipe away all loose dust before application. Ensure the wall is clean, dry, and free of surface debris.
Mix the coating powder with clean water in two stages. First, combine powder and water at a 1:1 ratio and mix at full speed for 3–5 minutes until fully dissolved and dispersed. Add a further 70–80% of the powder's weight in clean water to bring the total powder-to-water ratio to 1:1.6–1.8, then mix again at full speed for 3–5 minutes. Filter the mixture through a 100-mesh screen before applying.
Apply by roller or spray in two coats, with roughly 1 hour between coats. After the final coat, ventilate the area for approximately 2 hours to allow the coating to dry fully.
Apply in ventilated conditions at 5°C–35°C and 30%–85% relative humidity. Clean equipment with water immediately after use. Once mixed, the coating can be stored for up to 48 hours — if sedimentation occurs, remixing will not affect performance.
